Firmware Updates

Please select your product line, to find all available firmware versions.

Installing the new firmware: Updating your firmware is a three-step process:

1. Find and download the correct image file to your computer.

2. From the Maestro web interface go to the device tab and click the update button under firmware.

3. Follow prompts to browse to and select the file you just downloaded.

Revision 1.9.2, released October 15, 2014

  • Supported platforms: all -NA and -EU HDb2500, HDb2600, HDb2380, and HDb2840 Series products
  • Additional EAS capability with Monroe Electronics’ One-Net™ System via Monroe’s Stream MPEG 1/2 option.
  • Supported platforms can now display the new ZvShow channel allowing for a dedicated digital signage channel at no additional cost.
  • Through the new set top box control mechanism ZeeVee devices now have limited ability to monitor and control DIRECTV H25 receivers.

Revision 1.9.1, released June 6, 2014, 

  • Initial product release for the HDb2312-NA
  • Initial product release for the HDb2312-EU (as of November 17, 2014 update)

Revision 1.9.0, released May 6, 2014

  • Supported platforms: all -NA and -EU HDb2000 Series products
  • Improved video quality through improved rate-control mechanisms including better scene change tracking and edge quality, optimized selection of reference frame for bi-directional frames and implementation of field motion vectors for interlaced video with optimized selection of field or frame vectors.
  • Enables EAS Capability with Monroe Electronics’ One-Net™ System via Monroe’s unique EAS-Net™ protocol.

Revision 1.8.7, released February 13, 2014

  • Supported platforms: all -NA and -EU HDb2000 Series products
  • Adds the ability to invert the front panel display for ease of use in wall mounted applications
  • Addresses an RF issue with older HDbridge 2640, 2620, 2540, 2520, and 2380 Series Modulators

Revision 1.8.6, released January 29, 2014

  • Initial product release for the HDb2840
  • Supported platforms: all -NA and -EU HDb2000 Series products
  • Improvements:
    • Image quality for PAL resolutions
    • Improvements to HDMI link detection at startup

Revision 1.8.4, released December 30, 2013

  • Supported platforms: all -NA and -EU HDb2000 Series products
  • New Feature: DVB-T support for HDb2380-EU
  • Improvements:
    • Lip sync resolution
    • DVB-T signal quality improvements
    • Updated idle and test images for EU

Revision 1.8.3, released December 2, 2013

  • DVB-T tuning enhancements for HDbridge 2640, 2620, 2540 and 2520 HD Modulators
  • Correction for lip sync accrual

Revision 1.8.2, released November 20, 2013

  • Adjustment to v1.8.1, improving stability of all ZvPro and HDbridge 2000 Series Modulators

Revision 1.8.1, released October 17, 2013

  • All HDbridge 2500 and 2600 Series Modulators plus HDb2380-NA (QAM): Significant improvement to video quality through a unique implementation of mpeg-2 bidirectional -predictive frames (b-frames) and much better motion tracking.  The efficient implementation of b-frames still gets the benefits of reduced cumulative error (i.e. reduced video smudging) and smaller frame sizes. Smaller b-frames allow  the more important intra and  predicted frames to be larger, also improving the video. Finally, efficient b-frame encoding allows more time to track motion, allowing for another significant improvement in video quality
  • HDbridge 2500 and 2600 Series -EU products; includes DVB-T support

 

 

 

 

Revision 1.6.7, released August 15, 2013

  • Resolves intermittent audio cross over in HDb2380 units and reduces latency in UI and front panel display across all models

Revision 1.6.4, released July 25, 2013

  • New functionality:
    • All HDbridge 2000 Series products now support channel and RF power configuration via front-panel display
    • Custom idle screen can be applied per unit to replace ZeeVee logo
  • Updates & fixes:
    • Improved video quality
    • Improved audio sync (lip sync)

Revision 1.5.2, released May 20, 2013

  • Video quality enhancements for all HDbridge 2000 Series products
  • Support for VGA HD2500/2600 only (VGA DIN cable required)
  • Updates to Maestro web configuration/management tool and front panel display
  • PAL support for HDb2380-EU

Revision 1.4.3, released April 3, 2013

  • Video quality enhancements for all HDbridge 2000 Series products

Revision 1.3.0, released February 11, 2013

  • HDb2520/2540 initial production release

Revision 1.2.0, released January 8, 2013

  • HDb2380 video quality enhancements

Revision 1.1.2, released December 21, 2012

  • HDb2380 Bug fixes and performance improvements

Revision 1.1.0, released December 6, 2012

  • HDb2380 numerous audio and video quality improvements:
    • Spatial and temporal filtering of video
    • Audio lip sync improvements
    • Stability and usability improvements

Revision 1.0.1, released November 13, 2012

  • HDb2380 initial production release

Installing the new firmware: Updating your firmware is a three-step process:

1. Find and download the correct image file to your computer.

2. From the Maestro web interface go to the device tab and click the update button under firmware.

3. Follow prompts to browse to and select the file you just downloaded.

Revision 1.9.2, released October 15, 2014

  • Supported platforms: all -NA and -EU ZvPro Family products
  • Additional EAS capability with Monroe Electronics’ One-Net™ System via Monroe’s Stream MPEG 1/2 option.
  • Supported platforms can now display the new ZvShow channel allowing for a dedicated digital signage channel at no additional cost.
  • Through the new set top box control mechanism ZeeVee devices now have limited ability to monitor and control DIRECTV H25 receivers.

Revision 1.9.0, released May 6, 2014

  • Supported platforms: all -NA and -EU ZvPro Family products
  • Improved video quality through improved rate-control mechanisms including better scene change tracking and edge quality, optimized selection of reference frame for bi-directional frames and implementation of field motion vectors for interlaced video with optimized selection of field or frame vectors.
  • Enables EAS Capability with Monroe Electronics’ One-Net™ System via Monroe’s unique EAS-Net™ protocol.

Revision 1.8.7, released February 13, 2014

  • Supported platforms: all -NA and -EU ZvPro Family products
  • Adds the ability to invert the front panel display for ease of use in wall mounted applications

Revision 1.8.6, released January 29, 2014

  • Supported platforms: all -NA and -EU ZvPro Family products
  • Improvements:
    • Image quality for PAL resolutions
    • Improvements to HDMI link detection at startup

Revision 1.8.4, released December 30, 2013

  • Supported platforms: all -NA and -EU ZvPro Family products
  • Improvements:
    • Lip sync resolution
    • DVB-T signal quality improvements
    • Updated idle and test images for EU

Revision 1.8.3, released December 2, 2013

  • DVB-T tuning enhancements for ZvPro 820, 810, 620, 610 HD Modulators
  • Correction for lip sync accrual

Revision 1.8.2, released November 20, 2013

  • Adjustment to v1.8.1, improving stability of all ZvPro and HDbridge 2000 Series Modulators

Revision 1.8.1, released October 17, 2013

  • All ZvPro 600 and 800 Series Modulators: Significant improvement to video quality through a unique implementation of mpeg-2 bidirectional -predictive frames (b-frames) and much better motion tracking.  The efficient implementation of b-frames still gets the benefits of reduced cumulative error (i.e. reduced video smudging) and smaller frame sizes. Smaller b-frames allow  the more important intra and  predicted frames to be larger, also improving the video. Finally, efficient b-frame encoding allows more time to track motion, allowing for another significant improvement in video quality
  • ZvPro 600 and 800 Series -EU modulators; includes DVB-T support

 

 

Revision 1.7.0, released August, 2013

  • ZvPro 810, 820 initial production release

Revision 1.6.4, released July, 2013

  • New functionality:
    • ZvPro models 610 and 620 now support channel and RF power configuration via front-panel display
    • Delay Matched Audio output enabled for ZvPro 600 series
    • Custom idle screen can be applied per unit to replace ZeeVee logo
  • Updates & fixes:
    • Improved video quality
    • Improved audio sync (lip sync)

Revision 1.6.2, released June, 2013

  • ZvPro 610 initial production release

Revision 1.6.1, released May, 2013

  • ZvPro 620 initial production release

Installing the new firmware: Updating your firmware is a three-step process:

1. Find and download the correct image file to your computer.

Please note: if you have internet access while connected to the units, these links will be directly available in Webmanager.

2. From the WebManager Firmware Update tab, browse to and select the file you just downloaded.

3. Upload and install the new firmware image.

 

Revision 3.8.1, released April 24, 2012

  • Resolved issue setting channels when upgrading from firmware v3.6

Revision 3.8.0, released April 17, 2012

  • Inclusion of Dolby audio on all HDbridge™ modules

Revision 3.7.0, released February 2, 2012

  • Enhancements for 1080p - improves performance with both VGA and component sources. Since this is not a widely available analog format, there may be sources (especially HDMI converters) that have odd or unstable timings that we do not lock onto properly. We will do our best to work with customers on a case by case basis if needed.
  • Expanded RF output configuration – Previously the RF output was limited to increments of 5 (e.g. 5, 10, 15...). We have increased the granularity so RF power can be set to any value between 5 and 25
  • Stability fixes – General fixes to limit restarts and improve performance of all products

Revision 3.6.2, released September 22, 2011

  • Front button lockout - channel setting front-panel button defaults to locked after 30 seconds on HDbridge™ modules
  • Resolved issue with setting to QAM64
  • Linking RF and HDTV channel - Webmanager on HDbridge™ modules links RF channel and HDTV channel
  • Watermark image defaulted to off on HDbridge™ units

Revision 3.6.0, released July 15, 2011

  • HDbridge initial production release

Important - you MUST use the latest version of ZvConfig or ZvCli to upgrade your ZvBox.
Installing the new firmware: Start ZvConfig (ZvBox Configuration Utility) on your computer, and then connect your ZvBox via a USB cable. Once the connection is established (this can take a few minutes), do the following:
  • Click on the System tab
  • Click on Update Firmware
    …that's all there is to it!
Note: You will get the Windows hardware wizard after the upgrade completes and the first time you connect to any newly upgraded unit. This is normal and should only occur once per unit.

Revision 3.7.0, released February 2, 2012

  • Enhancements for 1080p - improves performance with both VGA and component sources. Since this is not a widely available analog format, there may be sources (especially HDMI converters) that have odd or unstable timings that we do not lock onto properly. We will do our best to work with customers on a case by case basis if needed.
  • Expanded RF output configuration – Previously the RF output was limited to increments of 5 (e.g. 5, 10, 15...). We have increased the granularity so RF power can be set to any value between 5 and 25
  • Stability fixes – General fixes to limit restarts and improve performance of all products

Revision 3.6.2, released September 22, 2011

  • Front button lockout - channel setting front-panel button defaults to locked after 30 seconds on ZvBox 160s
  • Channel Setting bug - changing channel number not reflected on some TVs when using ZvBox 170 & ZvBox 180 LCD front panel display. RF and HDTV channel numbers were accidentally unlinked
  • Resolved issue with setting to QAM64

Revision 3.5.1, released June 23, 2011

  • ZvBox 160 initial production release
  • Video quality - further improvements
  • Default datarate changed from 38mbs to 34mbs. Expands compatibility with HDTVs
  • Resolution change - more robust detection
  • Single Part HDTV channel numbers - added
  • Auto detection of audio on S/PDIF ports (Zv160 only)
  • Idle screen provides better information regarding incoming video. – messages about video status now show at the bottom of the screen, some examples are: no video, unrecognized video or calibration in progress

Revision 3.4.4, released May 5, 2011

Significant video quality improvements and release of ZvBox 180

  • Significant video quality improvements - for all products!
  • Eliminated “shimmer” on digital signage and other relatively static video sources
  • ZvBox 180 - initial release
  • Reset button - changed behavior
  • Video calibration of VGA sources now remembered through restarts, including customized phase and centering adjustments

Revision 3.1.3, released December 21, 2010

  • Various Audio fixes
  • Updates to split audio
  • Support for 720p30 and input refresh rates above 60hz

Revision 3.0.1, released October 4, 2010 (ZvPro 280 and ZvBox 170 only)

  • Video performance is improved - Hard-to-reproduce video like fast-action scenes, scene changes, and the edges of fast moving objects are reproduced smoothly and seamlessly. Especially noticeable when watching sporting events.
  • Ability to adjust capture of input video – New controls let you adjust Brightness, Contrast, Red-Blue-Green saturation, Centering, and Pixel Phase (fine tuning) for all HDTVs at once, making it easy to make all of your displays look their best.

Revision 2.5.0, released April 19, 2010

  • Split Audio - This feature tells ZvPro 250 to create two completely different HDTV channels that share the same video but each having different audio. The analog audio inputs (left and right) are split, each going to a different HDTV channel. One example application is to have a single ZvBox create two channels in two different languages.
  • QAM64 – This is a modulation type that can help the ZvBox channel propagate better across old or noisy Coax networks. The only drawback is that bitrate (and therefore picture quality) is slightly lower. QAM256 (the default) allows up to 38Mbs, while QAM64 is restricted 27Mbs. We recommend only using this mode when needed.
  • Improved ZvConfig - It is now possible to manage multiple ZvBoxes from a single PC using ZvConfig, an important component of remote ZvBox management. More to come on that soon!

Revision 2.4.1, released March 24, 2010

  • ZvConfig!! – All ZvBoxes can now be managed with our new graphical configuration utility. Click here to download, and here to read more. This firmware is required for compatibility with ZvConfig. Get ZvConfig first, and then immediately upgrade the firmware.
  • ZvBox 170 - This is the final firmware release that ships with the ZvBox 170. Be sure to upgrade if you have a pre-release unit.
  • Additional Video Modes supported for VGA video sources, particularly 1080p sources from computers (ZvPro 250 only).
  • Interoperability with some HDTVs - Changes in the video and audio streams that improve performance with some Toshiba and Handspree HDTVs.

Revision 2.3.0, released December 15, 2009

This release brings some improvements that users have been asking for. Yes, we do listen! Please keep those suggestions coming.

  • Custom Logo for Idle Screens – It is now possible to replace the bouncing Zv logo with a custom image of your own. You can either fill the entire screen, or load a smaller image and let it bounce around. Many different file types are supported.
  • Custom Logo for Watermarks – You can also replace the Zv logo that blinks in and out on the lower right corner of your live video.
  • Expanded Audio Delay – making it possible to introduce even more skew between the audio and video.
  • Disable the front panel Source button – Locks the front panel so that accidental or malicious source changing can't happen. (Does not apply to ZvBox 150)
  • Locally save Troubleshooting Reports – If you attempt to send a troubleshooting report and the PC cannot connect to our server, the report will be saved locally. You then has the ability to send the saved troubleshooting report(s) later, when the PC can connect to our server. (‘system show-saved-troubleshooting-reports’ and ‘system send-saved-troubleshooting-reports’).
  • Change LED brightness(ZvBox 150 only)Allows you to turn down the brightness of the blue LED on the front.
  • Changed Set Name – It is now called Set ZvBox-name. This is how you name ZvBoxes, allowing you to distinguish between different ones at a computer when several are simultaneously connected.

Revision 2.2.2, released November 2, 2009 (ZvPro 250 and ZvBox 150)

  • Audio Processing Improvements – Improved the handing of 44.1 khz and 48 khz PCM sources that deviate widely from the specification. Eliminated audio dropouts that occasionally happened. Eliminated accidental PCM left/right swapping.
  • 480i and 480p video processing – Improvements to SD performance, especially with noisy video sources.
  • Changes to factory defaults – The new default for 720p frame rate is 60fps (ZvPro 250 only), increased from 30fps. The new default for output data rate is High, increased from Normal. Note: new defaults are *not* automatically made active. An explicit reset to factory defaults is required.
  • Additional logging – designed to help troubleshoot deployments
  • Unit identification – The ZvCLI is now able to tell a ZvBox to identify itself by blinking all of its front panel lights. This is very helpful when managing multiple ZvBoxes at once.
  • Better stability – Prior firmware revisions could crash when presented with invalid audio streams. System stability has been improved overall, as has crash recovery.

Revision 2.1.3, released August 18, 2009

2.1.3 delivered some significant improvements to the functionality of all ZvBoxes. Video and Audio processing were greatly improved, and more video modes from VGA or Component sources are supported.

  • 720p video and audio enhancements - 720p video processing for both VGA and component sources has been improved.
  • 1080 assist(ZvBox 150 and ZvBox 170 only)ZvBoxes that do not support 1080 input resolutions will broadcast 1080 in ‘sampling mode’, sending a few frames of the image per second. This is extremely useful if you accidentally set your source device to 1080, and need to use an on-screen menu to change it. A message is displayed on-screen when that mode is active.
  • 480 video enhancements - Many of our customers are using 480 mode to create a digital channel from existing SD sources. We have made significant improvements to the video quality when operating in either 480 mode.
  • 44.1 Khz PCM audio is now accepted in addition to 48 KHz. This improves compatibility with Blu-ray players, Netflix boxes, Apple TV’s and CD players.
  • Audio improvements - Some TV models were exhibiting lip-sync errors, where the audio and video would not be properly synchronized. Although this could be corrected using the audio delay settings, the change would adversely effect TVs that did not exhibit the problem. The root cause of the shift was identified and corrected.
  • Broadcasting restart - Prior revisions did not stop broadcasting whenever the encoding stream was changed during source and mode changes. This could result in incomplete information being transmit, which was found to confuse some HDTVs. RF output is now switched off whenever a reconfiguration is in process, and re-enabled only after a complete, correct stream is being output.
  • Program information improvements - Some HDTVs were having trouble displaying EIT information sent by ZvBox. Compatibility is much improved.
  • EDID overwrite - ZvPro 250 provides timings for multiple HD resolutions to a PC via EDID information sent over the VGA connector. Two of the settings are used to reduce the size of the PC desktop when operating in 1080 or 720 modes where the HDTV is cropping the image. Previously, these values were hard-coded. This release allows the user to overwrite them to fine-tune the best fit. Use the set video-source test-image-1 command to determine the best choice for your HDTV.

Revision 2.1.0, released June 25, 2009

  • 1080 compatibility – ZvPro 250 is now compatible with 1080 video inputs in both “I” and “p” formats. Specifically, it will accept 1080i signals from HD video sources, and 1080p from computers; the broadcast resolution will match that of the input.
  • 480 upgrade - We’ve significantly improved the quality of ZvBox video output when it’s connected to 480i or 480p sources like standard definition cameras, DVD players, etc.
  • Better Audio-Video Control – We’ve added features that allow you to control frame rate, bit rate, and audio delay. These will help you get the best performance in your particular system.
  • Test Images – At the request of several of our customers, we’ve added test images that can be generated by your ZvBox. These images allow calibration of HDTVs receiving the Zv channel, for uniform performance when using multiple displays.
  • Improved management – It’s now easier than ever to configure ZvBoxes, and when working with multiples, the process is much faster. For greater convenience when you’re in the field, you can upgrade the firmware of a ZvBox straight from a PC, without being connected to the internet.