New ZeeVee Full-Featured ZyPer4K AVoIP Encoder and Decoder Wall Plates
In many environments, such as classrooms, conference rooms and event spaces, it is desirable to keep the critical AV system gear required—including signal distribution encoders and decoders—out of the way and out of sight.
Enter ZeeVee’s new full-featured ZyPer4K encoder and decoder wall plates that enable quick and clean connections of sources and video monitors in AVoIP-driven systems on walls, podiums, conference tables and other fixed position locations.
Both models feature 10/100/1000Base-T Ethernet ports for general purpose device attachment to a network, as well as audio input and output jacks to drive line-level stereo audio. They can distribute content via HDMI 2.0b and USB-C, as well as USB 2.0, which can be configured and routed via the ZeeVee ZyPer Management Platform (ZMP). A video select button on the encoder wall plate enables users to choose either HDMI or USB-C video inputs when both are connected.
The encoder and decoder wall plates feature IR-IN, IR-OUT and RS232 control ports that enable two-way infrared command information and side-band serial traffic to be distributed as configured by the ZMP.
The back of both the encoder and decoder wall plates provide a power port for connecting 24V DC power via a Phoenix connector, as well as a 10Gb copper (PoE) port for Ethernet connections over Cat6a (or better) cabling.
For more information on the new ZyPer4K encoder and decoder wall plates, please visit www.zeevee.com.