ZyPer MANAGEMENT PLATFORM FIRMWARE

Please contact Support for the latest firmware update
+1 (877) 493-3833 or send an email to info@zeevee.com.

 

ZYPER MANAGEMENT PLATFORM - REVISION 3.2 RELEASED SEPTEMBER 10, 2023

Version 3.2 of the ZyPer Management Platform is a major release with significant changes to the operating environment. Please review the ZyPer Management Platform Release Notes document before proceeding with the update.

  1. Supported platforms

ZyPer Management Platform

  • ProServer on Ubuntu v22.04
  • Simply NUC (Rev E) on Ubuntu v20.04
  • ProServer on Ubuntu v16.0.4
  • Intel NUC (Generation 2 Rev C and Generation 3 Rev D) on Ubuntu v16.0.4
  • VMWare ESXi appliance on Ubuntu v16.04

ZyPer Management Platform GUI web interface

  • Google Chrome

ZyPer Encoders and Decoders

  • ZyPer4K HDMI 2.0 encoders and decoders
  • ZyPerXR HDMI 2.0 encoders and decoders
  • ZyPerXS HDMI 2.0 encoders and decoders
  • ZyPerXS Wall Plates HDMI 2.0 encoders and decoders
  • ZyPer4K Netgear Module encoders
  • ZyPerUHD encoders and decoders
  • ZyPerUHD Wall Plate encoders
  • ZyPerUHD Dante encoders
  • ZyPerUHD60 HDMI 2.0 encoders and decoders (Not compatible with Existing ZyPerUHD devices)
  • ZyPerUHD60 HDMI 2.0 Dante encoders and decoders (Compatible with ZyPerUHD60 non-Dante devices)
  • ZyPer4K 12GSDI / HDMI 2.0 encoders
  • (New) ZyPerUHD60-2 HDMI 2.0 encoders and decoders (Not compatible with Existing ZyPerUHD devices)
  • (New) ZyPerUHD60-2 HDMI 2.0 Dante encoders and decoders (Compatible with ZyPerUHD60 non-Dante devices)

NOTE: On the UHD60-2s, these devices do not support any update package prior to 5.2.

WARNING: Installing older firmware update files on ZyPerUHD60-2 devices will cause the units to become inoperative.

  1. New features

Server

    • Support for ZyPerUHD-2 Encoder
    • Support for ZyPerUHD-2 Decoder
    • Support for ZyPerUHD-2 Dante Encoder
    • Support for ZyPerUHD-2 Dante Decoder
    • New disconnect all connections command

GUI

    • Support for ZyPerUHD-2 Encoder for source and source grid panels.
    • Support for ZyPerUHD-2 Decoder for source and source grid panels.
    • Support for ZyPerUHD-2 Dante Encoder for source and source grid panels.
    • Support for ZyPerUHD-2 Dante Decoder for source and source grid panels.

Device

    • ZyPerUHD-2 Encoder
    • ZyPerUHD-2 Encoder
    • ZyPerUHD-2 Dante Encoder
    • ZyPerUHD-2 Dante Decoder

Bug Fixes in this release

Resolved multiple issues in this version see section 4 “Issues resolved”

  1. End of support
  • No Longer Supported - Gigabyte NUC (Generation 1 Rev A) on Ubuntu v14.04.2
  • No Longer Supported - VMWare ESXi appliance on Ubuntu v14.04.2

Installing the new server software:

If updating from version 1.5.2 or greater, follow this process.

1. Use the link provide by ZeeVee support to download the latest software. Make note of the location where the software was downloaded.

2. In ZyPer Management Platform, enable the Server panel from the Panel Selection menu.

3. Drag the ZyPer update file and drop it in the box that reads “drop file here“.

4. The ZyPer update file name will appear below the words “Selected file“.

5. Click the “Update Server“ button.

6. A confirmation box will appear. Click “Update“ to proceed and “Cancel“ to abandon the update.

7. Once Update is selected, the confirmation box will disappear, and the ZyPer Management Platform will reboot.

8. It may be required to close the browser and log back in for any new features to appear.

If updating from version 1.0 - 1.4, follow this process.

1. Download the latest software from the ZeeVee website. Make note of the location of where the software was downloaded.

2. Open Windows Explorer and enter the IP address of the Management Platform using FTP.

3. The files folder will be displayed.

4. Drag and drop the software file into the /files folder.

5. Use the Telnet protocol to access the Management Platform API.

6. Use the “update” command to update the Management Platform. Once entered the Management Platform will reboot and the software will be updated. Note that the connection will be lost temporarily during the update process.

or

Contact Technical Support through form below