HDbridge 2900 Series
2 Channel HD-SDI 1080p Encoder/Modulator

hdb2920_stacktriple_straight_1000x277_copy_1

Distribute HD-SDI sources/channels of HD video up to 1080p resolution to an unlimited number of displays over almost any distance. The HDbridge 2900 series converts your receiver's HD-SDI output into an RF signal that is sent to an HDTV display's QAM and DVB-T/C digital tuner over coax cable. That means that you can send your content to an unlimited number of displays over nearly any distance - and change sources on any display simply by changing the channel on the display - virtually eliminating the need for a traditional AV matrix switcher.

This solution is ideal for anyone looking for an easy and affordable way to support a large number of displays such as a sports bar, house of worship, or digital signage. Multiple HDbridge units can be combined to create a headend that will support over 100 channels on your video network at each display. The HDbridge enables quick setup through the Maestro software to customize your sources and channels, as well as a front LCD panel to control and monitor the unit. This unit is designed especially for high channel density environments where rapid deployment, advanced management, and compatibility are critical. Used in some of the most famous ballparks in the world, this is an ideal solution for environments where you have a large number of displays, such as stadiums, entertainment facilities, or broadcast environments. Cables not included.

Models

HDb2920-NA - 2 Ch. QAM - RF only output
HDb2920i-NA - 2 Ch. QAM - RF and IP output
HDb2920-EU - 2 Ch. DVB-T/C - RF only output
HDb2920i-EU - 2 Ch. DVB-T/C - RF and IP output
Warranty: 5 Years

  • Converts 2 HD-SDI Inputs into 2 Digital HD channels on 2 QAM RF Frequencies
  • Converts 4 2 HD-SDI Inputs into 2 Digital HD channels up to 2 DVB-T/C RF Frequencies
  • Delay matched analog audio output on the first port for synchronizing whole house audio
 

Transmit in RF and IP

Simultaneously encodes two HD-SDI sources directly into an MPEG-2 IP network video stream as well as private RF channels that can be received by an unlimited number of HDTV displays

Emergency Alert System

Add an extra layer of safety to your facility by using the built-in Emergency Alert System.

The ZeeVee Emergency Alert System (EAS) can tie systems into national or local alert systems. ZeeVee processes alerts sent with either EAS-NET or MPEG streaming. When an alert is active, all current audio and video will be interrupted and replaced with the alert.

Setting up your channels is a snap with Maestro

The ZeeVee Maestro software makes it simple to setup and manage your content and channels from anywhere on your network. Simply open your web browser and connect to the IP address on any ZvPro or HDBridge encoder and you can assign channel numbers, label your custom channels, and troubleshoot problems right from your desk or anywhere you have network access.

Create your own custom channel with ZvShow

The HDbridge 2000 provides an extra channel to enable you to offer customized content on your displays in addition to your video source. This is in addition to the channels that are already included in each model.

ZvShow will play a video file (MP4, WMV, MOV) on a separate channel to enable you to use your displays to play commercials, display menus, or as digital signage. Simply change the channel on the display to select what content you want to see on your display.

LCD Color Front Panel Control

The HDbridge 2900 series has an easy to read LCD color front panel that makes it easy to setup and monitor your channels, check firmware, and identify IP addresses without a computer. The panel will show green, yellow, or red color bars on each channel to show the status of video and audio content being shown, as well enable easy adjustment of RF power

Directly control Set-Top boxes from your desk

The ZeeVee ZvSTB Control software enables you to manage your H25 DirecTV Reciever or other supported set-top box from directly from any computer through the Maestro software interface. Using an HDbridge or ZvPro, you can turn the receiver on or off, change channels, as well as edit the channel names appearing on the screen from any computer that you have network access.

Combine Multiple Units for More Channels

Combine multiple HDbridge units to create a video network head end up to 144 sources /channels over a single coax cable

Add a Digital Tuner to your display with ZvSync

Have a projector or other display that doesn't have a QAM or digital tuner? No problem. The ZvSync (sold separately) enables you to connect any display or projector to the HDbridge encoder coax connection and receive crystal clear video up to1080p resolution just as if your display was built with a digital coax tuner. Perfect for sports bars and house of worship applications that use projectors and televisions in the same space.

5-year Warranty

ZeeVee provides a 5-year warranty on all HDbridge and ZvPro products. Wow!

WHITEPAPER: ZeeVee Security Features and Best Practices

Interested in ZeeVee Products? Contact Us!

Need to contact support? Click here